![]() I have Windows, Linux, and iOS clients on the same network and none of them experience this issue.Įdit: I'm pretty sure it's RA related because disabling advertising makes the problem magically disappear.Īdd address=::/128 comment="defconf: unspecified address" list=bad_ipv6Īdd address=::1/128 comment="defconf: lo" list=bad_ipv6Īdd address=fec0::/10 comment="defconf: site-local" list=bad_ipv6Īdd address=::ffff:0.0.0.0/96 comment="defconf: ipv4-mapped" list=bad_ipv6Īdd address=::/96 comment="defconf: ipv4 compat" list=bad_ipv6Īdd address=100::/64 comment="defconf: discard only " list=bad_ipv6Īdd address=2001:db8::/32 comment="defconf: documentation" list=bad_ipv6Īdd address=2001:10::/28 comment="defconf: ORCHID" list=bad_ipv6Īdd address=3ffe::/16 comment="defconf: 6bone" list=bad_ipv6Īdd address=::224.0.0.0/100 comment="defconf: other" list=bad_ipv6Īdd address=::127.0.0.0/104 comment="defconf: other" list=bad_ipv6Īdd address=::/104 comment="defconf: other" list=bad_ipv6Īdd address=::255.0.0.0/104 comment="defconf: other" list=bad_ipv6Īdd action=drop chain=forward disabled=yes in-interface=ether1 log=yes log-prefix=v6dropĪdd action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untrackedĪdd action=drop chain=input comment="defconf: drop invalid" connection-state=invalidĪdd action=accept chain=input comment="defconf: accept UDP traceroute" port=33434-33534 protocol=udpĪdd action=accept chain=input comment="defconf: accept DHCPv6-Client prefix delegation. Not just losing IPv6 or dropping traffic, but actually disconnecting and immediately reconnecting to the wifi. The problem is Android clients keep dropping their wifi connection. Untuk mencoba konfigurasi IPv6 pada router MikroTik, maka disini kita akan membuat sebuah topologi sederhana. Kemudian reboot router supaya fitur IPv6 aktif. ![]() ![]() Kita bisa masuk pada menu System -> Packages -> pilih ' IPv6 ' -> klik tombol command ' Enable '. ![]() Tunnel is up, IPv6 traffic passing through the router, etc. Untuk penggunaan fitur IPv6 kita tinggal mengaktifkannya (enable). We'll disable access (input) from the WAN side by adding some basic firewall rules, then create a firewall address list for blocking Bogons. I followed the guide here and everything tests pretty good. Despite the configurations already changed an attacker could still attempt to login with the default Mikrotik admin credentials across the Internet using SSH or Winbox and would succeed. I'm experimenting with IPv6 using a 6to4 tunnel from Hurricane Electric.
0 Comments
Leave a Reply. |